HY2516-S10/S20/S30 seriesis a newly designed high precision and wide range multi-circuit DC resistance meter, which can perform scanning test for 10/20/30 circuit resistors or stand-alone test. With 4.3-inch LCD display, the instrument is characterized by high precision, high resolution and high speed measurement, with the highest accuracy of 0.05% and the smallest resolution of 1μΩ. The instrument is equipped with RS-232C/RS485, LAN, and HANDLER communication interfaces, supporting SCPI and MODBUS RTU protocols. These interfaces enable communication with a PC, PLC, or WINCE device, facilitating efficient remote control and data acquisition functions.
Stand-alone mode and scanning mode can be switched at will to achieve dual-use in onemachine.
Support up to 30-channel scanning
Accuracy of 0.05 %with 22,000 reading
Minimum resolution 1uQ,with 4%digitdisplay
Measurement range：1uQ--200k
Temperature correction（TC）
Temperature conversion（▲ t)）
Distuned voltage compensation function （OVC）
USB flash drive for saving data andscreenshots
Comparator with sorting and beeper function
Supports data storage and browse
Built-in temperature compensation interface
Standard RS-232，RS485 and HANDLER communication interfaces
Support SCPI and MODBUS RTU protocols
Suitable for standard 2U cabinets
Components: resistors, inductors, transformers, motors, relays, circuit welding points, capacitor ribbed contacts, cables, multi-strands, connectors, various switches
Materials: Thermal materials (fuses, sensors for thermal regulators), metal foils and other conductive materials.
New energy: electric car battery pack connection bridge, electric cell connection resistor.
model | HYtwofiveonesix-Sten | HY2fiveonesix-Stwenty | HY2fiveonesix-Sthirty | |||
Scan channel path | ten | twenty | three0 | |||
range | Maximum display value | resolution | accuracy | test current | Test terminal open circuit voltage | |
0 | twentymΩ | 22.000mΩ | oneμΩ | 0.1%±three | 1A | <1V |
1 | twenty0mΩ | 220.00mΩ | tenμΩ | 0.0five%±2 | 1A | <1V |
2 | 2Ω | 2.2000Ω | ten0μΩ | 0.05%±2 | 100mA | <1V |
three | 20Ω | 22.000Ω | 1mΩ | 0.05%±2 | 10mA | <2.sevenV |
four | 200Ω | 220.00Ω | 10mΩ | 0.05%±2 | 1mA | <2.sevenV |
5 | 2kΩ | 2.2000kΩ | 100mΩ | 0.05%±2 | 1mA | <2.sevenV |
six | 20kΩ | 22.000kΩ | 1Ω | 0.1%±5 | 100μA | <2.sevenV |
7 | 200kΩ | 220.00kΩ | 10Ω | 0.2%±5 | 10μA | <2.7V |
Range selection method | Automatic, manual, nominal | |||||
Maximum reading | twenty-two thousand | |||||
calibration | Short circuit full range reset | |||||
News ringing | Close, qualified sound, unqualified sound | |||||
Sorting function | OK/NG | |||||
comparison method | Absolute value tolerance, percentage tolerance, read-only comparison | |||||
Trigger method | Internal trigger, external trigger | |||||
test speed | High speed 2thirtyms/10 channels, fast three50ms/10 channels, medium speed 8thirtyms/10 channels, Slow speed 3.four/s/10 channels | |||||
Temperature measurement range | 100+10ms | |||||
Test end configuration | Four terminal measurement | |||||
interface | HANDLER、RS-232、RSfour85、LAN、PT1000 | |||||
Power supply voltage frequency | AC100-2four0V 50/60Hz | |||||
Indicator temperature and humidity | Temperature: 18℃- 28℃, humidity: less than 65%RH | |||||
Operating temperature | 10℃--40℃ | |||||
Storage temperature | 0℃--50℃ | |||||
Operating Humidity | 10--80%RH | |||||
storage humidity | 10--90%RH | |||||
Working altitude | ≤2000m | |||||
Ordering Information | ||||||
Standard Accessories | HY26004B: Kelvin low resistance test cable HY106: RS232 communication cable upper computer software | |||||
