HY4500 Series Multi-channel Temperature Tester includessix models HY4508/HY4516/HY4524/HY4532/HY4540/HY4548 , which respectively corresponding to 8, 16, 24, 32, 40 and 48 channels. Instrument 4.3 inches LCD colorscreen display, page beautiful, can be simultaneously on the multi-channel data acquisition, on the super lower super alarm and communication transmission, compatible with a variety of temperature sensors, fast response speed, data stability,
4.3-inch LCD true color LCD display
Equipped with wide adaptability, supporting K/N/E/small/T/R/S/B type thermocouples
Test range: -200 ℃ -1800 ℃
Temperature test main parameter display with 6 digits, resolution up to 0.01 ℃
Two scanning speeds: fast (depending on different models), slow
Automatic detection of broken couples
Intuitive numerical readings, displayed in bar and curve charts
Cold end compensation
Support USB storage
File management is available, and the current instrument settings will not be lost when shutting down
The instrument comes standard with a 2-meter K-type thermocouple test line, which can measure temperatures ranging from -20 ° C to 200 ° C
Specially designed temperature upper and lower limit over limit alarm and over limit reading change warning, which can set the upper and lower limits for each temperature data channel
Suitable for standard 2U cabinets
The curve graph is an example of the curve display of channel temperature changing over time. The horizontal axis represents time, and the vertical axis represents temperature. So before entering the curve test, you can first use the "Y-axis zoom in" and "Y-axis zoom out" to roughly evaluate the approximate temperature range of the test object. Secondly, you can use the "interval" setting to narrow down the temperature display range on the vertical axis of the curve graph.
A bar chart can be used to visually observe the high and low temperature values of multiple channels in the same set of test modules, and to compare the percentage of high and low temperature values of 8 channels on the same set of test modules.
Suitable for manufacturers and quality inspection departments in industries such as home appliances, motors, electric heating appliances, thermostats, transformers, ovens, thermal protectors, power supplies, lighting, electricity, LED, etc. to test multi-point temperature.
| model | HY450eight | HY45sixteen | HY45twenty-four | HY45thirty-two | HY45forty | HY45forty-eight |
| number of channels | 8 | sixteen | twenty-four | thirty-two | forty | forty-eight |
| Measurement display | Intuitive numerical display, bar chart display, curve chart display | |||||
| interface | USB HOST, RS2thirty-twoC, LAN, DCtwenty-fourV, RSforty-eight5 (optional) | |||||
| graduation mark | Thermocouples J, K, T, E, S, N, B, R | |||||
| test scope | -200 ℃ -1800 ℃ (varies depending on different thermocouple models) | |||||
| resolution | 0.01℃ | |||||
| number of channels | 8-48 channels (equipped according to different product models) | |||||
| Power supply voltage frequency | AC100-2fortyV50/60Hz | |||||
| Indicator temperature and humidity | Temperature: 15℃- 35℃, humidity: less than 80%RH | |||||
| Sensor Model | Test temperature range (℃) | Measurement accuracy (℃) | Instructions | |||
| T-type thermocouple | -150 ℃ to 0 ℃ | ±1.0 | 1. This is the instrument accuracy and does not include standard contact compensation accuracy. 2. The standard contact compensation adds ± 0.5 ℃ to the measurement accuracy of the thermocouple. 3. The measurement accuracy of thermocouple sensors is mainly based on the standards of the sensor manufacturer. 4. The standard K-type test line for the instrument has a temperature resistance range of -20 to 200 ℃; The measurement accuracy is ± 1.2 at -20 to 0 ℃ and ± 0.8 ℃ at 0 to 200 ℃. 5. The isolation voltage between instrument channels is 350V DC and 230V AC. | |||
| 0 ℃ to 400 ℃ | ±0.8 | |||||
| Type K thermocouple | -100 ℃ to 0 ℃ | ±1.2 | ||||
| 0 ℃ to 1350 ℃ | ±0.8 | |||||
| J-type thermocouple | -100 ℃ to 0 ℃ | ±1.0 | ||||
| 0 ℃ to 1200 ℃ | ±0.7 | |||||
| N-type thermocouple | -100 ℃ to 0 ℃ | ±1.5 | ||||
| 0 ℃ to 1300 ℃ | ±0.9 | |||||
| E-type thermocouple | -100 ℃ to 0 ℃ | ±0.9 | ||||
| 0 ℃ to 850 ℃ | ±0.7 | |||||
| S-type thermocouple | 0 ℃ to 100 ℃ | ±4.5 | ||||
| 100 ℃ to 300 ℃ | ±3.0 | |||||
| 300 ℃ to 1750 ℃ | ±2.2 | |||||
| R-type thermocouple | 0 ℃ to 100 ℃ | ±4.5 | ||||
| 100 ℃ to 300 ℃ | ±3.0 | |||||
| 300 ℃ to 1750 ℃ | ±2.2 | |||||
| Type B thermocouple | 600 ℃ to 800 ℃ | ±5.5 | ||||
| 800 ℃ to 1000 ℃ | ±3.8 | |||||
| 1000 ℃ to 1800 ℃ | ±2.5 | |||||
| Ordering Information | ||||||
| Standard Accessories | HY401: K-type thermocouple x 8 pieces (2 meters/piece) (only HY4508) HY401: K-type thermocouple x sixteen pieces (2 meters/piece) (only HY4516) HY401: K-type thermocouple x 24 pieces (2 meters/piece) (only HY4524) HY401: K-type thermocouple x 32 pieces (2 meters/piece) (only HY4532) HY401: K-type thermocouple x 40 pieces (2 meters/piece) (only HY4540) HY401: K-type thermocouple x 48 pieces (2 meters/piece) (only HY4548) 8GB USB flash drive Standard data acquisition software HY106: RS232 communication cable | |||||
