HY5683 Insulation Resistance Tester is controlled by high performance processor with 4.3-inch TFT-LCD display. Output voltage can be arbitrarily set 1V~1000V, to meet most of the test requirements. With six ranges of measurement, the insulation resistance measurement range is up to 10kΩ~10TΩ, the sampling rate is up to 30ms/time, and rich communication interfaces, it provides the preferred testing solution for automated production.
产品特点/ Product features
Adopting a 4.3-inch TFT-LCD display and simple panel operation
Real time monitoring of output voltage
Dual display of insulation resistance and leakage current
Adjustable charging time, testing time, and discharging time
Calibration function, full range open circuit reset
Contact inspection function for capacitive materials
Select digit display function (5-digit/4-digit)
The comparator function enables the sorting of qualified and unqualified products
Sorting and judging sound setting function
Quick discharge function
USB data recording
Can store 100 test files and support USB file access
Rich interfaces, supporting SCP and MODBUS protocols
测量应用/ Measurement application
Ultra-high value resistor
Insulation testing required by safety regulations
Various dielectric insulation materials, equipment, and wires and cables
Automated testing system
Insulation resistance of capacitors
面板介绍/ Panel introduction
技术指标/ Technical indicators
model
HY5683
measurement parameters
Insulation resistance, leakage current
output voltage
Program control 1V~1000V (DC):
When the voltage is ≥ 10V, adjust the step by 1V
When the voltage is less than 10V, adjust the step to 0.1V
voltage accuracy
1% ± 1V when voltage ≥ 10V
When the voltage is less than 10V, adjust the step to 0.1V
measurement range
Resistance: 10k Ω~10T Ω
Current: 100pA~250uA
measurement accuracy
1V ≤ voltage <10V
5% (<1M)；1% (1M~100M)； 5% (100M~10G)； 10% (greater than 10G);
10V ≤ Voltage ≤ 1000V
5% (less than 1M); 1% （1M~1G）； 3% （1G~10G）；
5%（10G~100G)； 10%（100G~1T）； 15% (greater than 1T);
test speed
Fast: 30ms/time, medium speed: 100ms/time, slow speed: 500ms/time
Range method
Automatic, locked, nominal (select optimal range based on comparator settings)
Maximum charging current
25mA±5mA
display results
Voltage, current, resistance, sorting results, sound and light alarms
Trigger method
Internal trigger, manual trigger, external trigger, bus trigger
Charging time
0～999s
Test time
0～999s
discharge time
0～999s
Comparator function
1 set of records to determine whether to exceed (UFAIL), pass (PASS), or exceed (LFAIL)
Correction function
Full range open circuit reset
display
4.3寸 TFT-LCD
Storage and Interface
USB HOST
Yes (maximum support for 128GB USB flash drive)
file management
Can save 100 test settings files and support USB file access
